TTX
TTX™ – TERRAIN TOUGH EXTREME
MAXIMUM PERFORMANCE FOR YOUR TRUCK OR WORKING VEHICLE
ENGINEERED FOR HEAVY DUTY APPLICATIONS
Engineered in-house from the ground up to be the strongest, most durable parts in the market, Mevotech™ TTX Parts™ deliver extreme performance. TTX parts are built for high usage vehicles, such as fleets and working trucks. Designed by engineers who analyze OE wear patterns and failure points, TTX parts feature patented technology that excels in the most demanding operating environments.
GET MORE IN THE BOX
Whether we’re engineering the ultimate component upgrades, supplying labor-saving add-ons or providing industry-best support, we work hard to be the Technician’s choice.
MEVOTECH TTX BALL JOINTS
X-Factor Design Upgrades
PWR-TEK Design
Upgrade to parts that can withstand extreme loading conditions with high-strength steel and larger bearings that are guaranteed not to deform.
Knurled Housing
Precision engineered ridges for tighter grip between connecting components.
Locking Boot
Boot design permanently fixes boot to housing and creates perfect seal, keeping out contaminants.
Quad Sealing System
Additional lips on boot sealing surfaces prevent contaminants from entering into the boot.
Increased Ball Stud Diameter
Increased sphere diameters improve contact pressure and durability of ball pin.
Larger/Thicker Housing Flanges
Provides additional strength and stiffness to the ball joint. Reduces the likelihood of deformation of the ball joint housing during installation. Facilitates the use of a wider range of ball joint installation tools.
Greaseable Ball Joints
Ball Joint is serviceable allowing the user to continue to grease the ball joint improving the service life of the ball joint.
Sintered Metal Bearings
Bearings made of a durable sintered powder metal that leads to a longer lasting part.
Patented Snap-In Bearing
Oversized sintered metal bearing with large contact area is engineered to accommodate challenges of a worn knuckle.
Self-Sealing Grease Relief
Grease relief that acts like a one-way valve allowing excess grease to flow out of the boot while preventing contaminants entering the boot.
REPEL-TEK Coatings
Corrosion resistant coatings that prevent the formation of rust for a longer part service life.
Integriboot
Boot is mechanically locked in place by the housing lamination preventing contaminants from entering the boot.
Patented Stepped Bearings
Engineered bearings designed with a recess that prevent flattening of the Belleville spring washer which leads to an increased service life of the ball joint.
Circlip
Secure the ball joint with the circlip included to provide supplementary retention for the ball joint housing, locking it into place.
Patented Directional Bearing
Allows for proper implementation of upper bearing on ball joints with larger swing angle in one direction. Addition of upper bearing provides additional contact area and greater pressure distribution for less wear.
Higher Grade Hardware
Hardware provided is made with a high grade and strength.
Premium Grease
Ball Joint is provided with premium grease that leads to an improved ball joint life.
Labor Savers in the Box
Bootstaller
Additional tool provided in the box that can easily install boots without damaging the boot.
Press-Through Boot
Boot is designed to enable the ball joint to be installed without removing the boot. Saves the technician time and reduces the possibility of damaging the boot during installation.
Application-Specific Fitment Analysis
Engineering is done specifically for the application to ensure perfect fitment of the part on the vehicle.
Quick Loader Plate
Ball joint attachment fasteners pressed into attachment plate allows the ball joint to be installed with a single tool.
Specialized Tools
Include specialized application specific installation tools that are not readily available. Hardened steel socket that technician can use to remove the OEM ball joint and install the TTX ball joint in the steering knuckle.
Additional Hardware
Application specific mounting hardware are included with the part to complete the installation of the part.
Easy Snap Locking Pin
Ensure your ball joint is securely locked with our spring steel locking clip design, nut pre-loaded with fastener adhesive that complies with and exceeds IFI, DIN specifications.
In-Box Instructions
Get instructions, advice and warnings directly from our engineers to help you install our parts.
Installation adapter
Prevent your ball joints from being damaged during installation with high-strength alloy steel adapter tools designed for TTX ball joint installation flanges less than ¼” wide.
Anti-Rotation Features
Parts engineered with anti-rotation features that speed up and give piece of mind during installation.
Integriboot
Boots designed to come pre-installed onto ball joint saving the time during ball joint installation.
Nylon Lock Nuts
Nuts with integrated locking feature that removes the need to align nut to install cotter pin, saving time during installation.
MEVOTECH TTX CONTROL ARMS
X-Factor Upgrades
PWR-TEK Design
Upgrade to parts that can withstand extreme loading conditions with high-strength steel and larger bearings that are guaranteed not to deform.
Locking Boot
Boot design permanently fixes boot to housing and creates perfect seal, keeping out contaminants.
Quad Sealing System
Additional lips on boot sealing surfaces prevent contaminants from entering into the boot.
Increased Ball Stud Diameter
Increased sphere diameters improve contact pressure and durability of ball pin.
Upgraded Bushing Designs
Bushings are upgraded with filled in voids and/or additional rubber to improve the durability of the bushing.
Enhanced Cross Sections
Additional material is added to the part to improve body stiffness and strength.
Bushing Radial Knurling
Bushing design with knurling on inner sleeve that assists to secure the bushing to the frame.
Greaseable Ball Joints
Ball Joint is serviceable allowing the user to continue to grease the ball joint improving the service life of the ball joint.
Sintered Metal Bearings
Bearings made of a durable sintered powder metal that leads to a longer lasting part.
Self-Sealing Grease Relief
Grease relief that acts like a one-way valve allowing excess grease to flow out of the boot while preventing contaminants entering the boot.
REPEL-TEK Coatings
Corrosion resistant coatings that prevent the formation of rust for a longer part service life.
Integriboot
Boot is mechanically locked in place by the housing lamination preventing contaminants from entering the boot.
Patented Stepped Bearings
Engineered bearings designed with a recess that prevent flattening of the Belleville spring washer which leads to an increased service life of the ball joint.
Higher Grade Hardware
Hardware provided is made with a high grade and strength.
Premium Grease
Ball Joint is provided with premium grease that leads to an improved ball joint life.
Ball Pin Surface Hardening
Ball Pins are surface hardened to prevent premature wear and improve fatigue life
Cold Forged Ball Pins
Ball Pins are cold forged which provides enhanced durability and fatigue life.
Labor Savers in the Box
Additional Hardware
Application specific mounting hardware are included with the part to complete the installation of the part.
In-Box Instructions
Get instructions, advice and warnings directly from our engineers to help you install our parts.
Anti-Rotation Features
Parts engineered with anti-rotation features that speed up and give piece of mind during installation.
Nylon Lock Nuts
Nuts with integrated locking feature that removes the need to align nut to install cotter pin, saving time during installation.
MEVOTECH TTX WHEEL HUB ASSEMBLIES
WHEEL HUB ASSEMBLIES
Engineered Internals
Precision-engineered higher grade rolling elements and optimized geometry to minimize rolling resistance and maximize load distribution. Components are matched together for exact mating fitment – meaning quiet performance and longer service life.
Generation 3 Orbital Roll Forming
Roll forming locks internal components for a set preload right out of the box. No adjustment is required over service life. Increased assembly stiffness reduces potential vibration and improves part life.
Advanced Sealing
Low-friction, heavy-duty Advanced Quantum Sealing System with a multi-lip profile that provides several layers of defense to keep contaminants out and vital grease in.
NanoCeramic Lubricant Technology
NanoCeramic lubricant withstands extreme temperatures, resists corrosion and washout, and retains viscosity. Particles also act as microscopic bearings reducing friction, filling and smoothing out raceways and rolling elements.
Uninterrupted Wheel Speed Signal
A molded, thicker and abrasion-resistant cord guards against perforation and contaminants at both the sensor and plug ends to ensure a faultless signal for ABS, TCS and other vehicle safety systems. The sensors match to the original for type and output characteristics, meaning no interruption in this service.
Repel-TEK Anti-Corrosion
Repel-TEK™ anti-corrosion coating is applied to every surface, including studs and hardware, to prevent buildup and contaminant intrusion. This also makes removing associated components easier, like swapping wheels, replacing a CV shaft or a brake rotor.
Everything in the Box for a Complete Job
Where applicable, fastening hardware, fastening torque specifications and vehicle ABS signal type are included for a quick and complete repair.
MEVOTECH TTX COMPRESSION STABILIZER LINKS
X-Factor Upgrades
PWR-TEK Design
Upgrade to parts that can withstand extreme loading conditions with high-strength steel and larger bearings that are guaranteed not to deform.
Quad Sealing System
Additional lips on boot sealing surfaces prevent contaminants from entering into the boot.
Increased Ball Stud Diameter
Increased sphere diameters improve contact pressure and durability of ball pin.
Upgraded Bushing Designs
Bushings are upgraded with filled in voids and/or additional rubber to improve the durability of the bushing.
Enhanced Cross Sections
Additional material is added to the part to improve body stiffness and strength.
Bushing Radial Knurling
Bushing design with knurling on inner sleeve that assists to secure the bushing to the frame.
Greaseable Ball Joints
Ball Joint is serviceable allowing the user to continue to grease the ball joint improving the service life of the ball joint.
Sintered Metal Bearings
Bearings made of a durable sintered powder metal that leads to a longer lasting part.
Self-Sealing Grease Relief
Grease relief that acts like a one-way valve allowing excess grease to flow out of the boot while preventing contaminants entering the boot.
REPEL-TEK Coatings
Corrosion resistant coatings that prevent the formation of rust for a longer part service life.
Integriboot
Boot is mechanically locked in place by the housing lamination preventing contaminants from entering the boot.
Optimized Compression Control (OCC) Design
Designed to prevent over-compression of bushings during installation which extends the service life of the bushing.
Patented Stepped Bearings
Engineered bearings designed with a recess that prevent flattening of the Belleville spring washer which leads to an increased service life of the ball joint.
Higher Grade Hardware
Hardware provided is made with a high grade and strength.
Premium Grease
Ball Joint is provided with premium grease that leads to an improved ball joint life.
Ball Pin Surface Hardening
Ball Pins are surface hardened to prevent premature wear and improve fatigue life
Cold Forged Ball Pins
Ball Pins are cold forged which provides enhanced durability and fatigue life.
Labor Savers in the Box
Additional Hardware
Application specific mounting hardware are included with the part to complete the installation of the part.
In-Box Instructions
Get instructions, advice and warnings directly from our engineers to help you install our parts.
Anti-Rotation Features
Parts engineered with anti-rotation features that speed up and give piece of mind during installation.
Nylon Lock Nuts
Nuts with integrated locking feature that removes the need to align nut to install cotter pin, saving time during installation.
MEVOTECH TTX Tie Rods
X-Factor Upgrades
PWR-TEK Design
Upgrade to parts that can withstand extreme loading conditions with high-strength steel and larger bearings that are guaranteed not to deform.
Locking Boot
Boot design permanently fixes boot to housing and creates perfect seal, keeping out contaminants.
Quad Sealing System
Additional lips on boot sealing surfaces prevent contaminants from entering into the boot.
Increased Ball Stud Diameter
Increased sphere diameters improve contact pressure and durability of ball pin.
Enhanced Cross Sections
Additional material is added to the part to improve body stiffness and strength.
Greaseable Ball Joints
Ball Joint is serviceable allowing the user to continue to grease the ball joint improving the service life of the ball joint.
Sintered Metal Bearings
Bearings made of a durable sintered powder metal that leads to a longer lasting part.
Self-Sealing Grease Relief
Grease relief that acts like a one-way valve allowing excess grease to flow out of the boot while preventing contaminants entering the boot.
REPEL-TEK Coatings
Corrosion resistant coatings that prevent the formation of rust for a longer part service life.
Patented Stepped Bearings
Engineered bearings designed with a recess that prevent flattening of the Belleville spring washer which leads to an increased service life of the ball joint.
Anti-Corrosion Coatings
Corrosion resistant coatings that prevent the formation of rust for a longer part service life.
Patented Directional Bearing
Allows for proper implementation of upper bearing on ball joints with larger swing angle in one direction. Addition of upper bearing provides additional contact area and greater pressure distribution for less wear.
Higher Grade Hardware
Hardware provided is made with a high grade and strength.
Premium Grease
Ball Joint is provided with premium grease that leads to an improved ball joint life.
Ball Pin Surface Hardening
Ball Pins are surface hardened to prevent premature wear and improve fatigue life
Cold Forged Ball Pins
Ball Pins are cold forged which provides enhanced durability and fatigue life.
Labor Savers in the Box
Additional Hardware
Application specific mounting hardware are included with the part to complete the installation of the part.
Easy Snap Locking Pin
Ensure your ball joint is securely locked with our spring steel locking clip design, nut pre-loaded with fastener adhesive that complies with and exceeds IFI, DIN specifications.
In-Box Instructions
Get instructions, advice and warnings directly from our engineers to help you install our parts.
Anti-Rotation Features
Parts engineered with anti-rotation features that speed up and give piece of mind during installation.
Longer Wrench Flats
Tie rods designed with longer wrench flats that provide a larger area for using a wrench which eases installation.
Nylon Lock Nuts
Nuts with integrated locking feature that removes the need to align nut to install cotter pin, saving time during installation.
MEVOTECH TTX Pitman Arm
X-Factor Upgrades
Greaseable Ball Joints
Ball Joint is serviceable allowing the user to continue to grease the ball joint improving the service life of the ball joint.
Sintered Metal Bearings
Bearings made of a durable sintered powder metal that leads to a longer lasting part.
Self-Sealing Grease Relief
Grease relief that acts like a one-way valve allowing excess grease to flow out of the boot while preventing contaminants entering the boot.
Higher Grade Hardware
Hardware provided is made with a high grade and strength.
Ball Pin Surface Hardening
Ball Pins are surface hardened to prevent premature wear and improve fatigue life
Labor Savers in the Box
Additional Hardware
Application specific mounting hardware are included with the part to complete the installation of the part.
Anti-Rotation Features
Parts engineered with anti-rotation features that speed up and give piece of mind during installation.
Nylon Lock Nuts
Nuts with integrated locking feature that removes the need to align nut to install cotter pin, saving time during installation.
MEVOTECH TTX idler arm
X-Factor Upgrades
Greaseable Ball Joints
Ball Joint is serviceable allowing the user to continue to grease the ball joint improving the service life of the ball joint.
Sintered Metal Bearings
Bearings made of a durable sintered powder metal that leads to a longer lasting part.
Self-Sealing Grease Relief
Grease relief that acts like a one-way valve allowing excess grease to flow out of the boot while preventing contaminants entering the boot.
Higher Grade Hardware
Hardware provided is made with a high grade and strength.
Ball Pin Surface Hardening
Ball Pins are surface hardened to prevent premature wear and improve fatigue life
Labor Savers in the Box
Additional Hardware
Application specific mounting hardware are included with the part to complete the installation of the part.
Anti-Rotation Features
Parts engineered with anti-rotation features that speed up and give piece of mind during installation.
Nylon Lock Nuts
Nuts with integrated locking feature that removes the need to align nut to install cotter pin, saving time during installation.
MEVOTECH TTX Alignment Aids
X-Factor Upgrades
Greaseable Ball Joints
Ball Joint is serviceable allowing the user to continue to grease the ball joint improving the service life of the ball joint.
Labor Savers in the Box
In-Box Instructions
Get instructions, advice and warnings directly from our engineers to help you install our parts.
MEVOTECH TTX Strut Mounts
Labor Savers in the Box
Additional Hardware
Application specific mounting hardware are included with the part to complete the installation of the part.
MEVOTECH TTX Rack & Pinion Boots
Labor Savers in the Box
Additional Hardware
Application specific mounting hardware are included with the part to complete the installation of the part.
Discover parts that install easier, last longer and deliver performance you can trust, only from Mevotech.
BECOME A MEVOTECH INSIDER
Get tech tips, product updates and industry insights delivered right to your inbox.